Anritsu provides a range of products capable of supporting all of the current major global standards such as HSPA, UMTS, GSM, E-GPRS, CDMA2000, 1X-EVDO, Bluetooth, W-LAN, PDC, PHS and IS-95 which are suitable for R&D, Manufacturing, Repair and Cell site installation & maintenance.
As an Intelligent Solutions Provider, we also provide a range of services to ensure our products are deployed and supported to suit individual needs.
 Mobile Solutions [Back to top]
802.11 WLAN Testers [Back to top]  | Spectrum Analyzer - 9 kHz to 7.8 GHz (MS2683A)
Range |
RBW |
Noise
Level (dBm) |
9
kHz to 7.8 GHz |
1
Hz - 20 MHz |
Down
to -146.5 dBm (option and frequency dependent) |
The MS2683A has been designed to provide the optimum performance required for evaluation of thrid generation advanced radio communication devices.
|
 | Spectrum Analyzer - 9 kHz to 30 GHz (MS2687B)
Range |
RBW |
Noise
Level (dBm) |
9
kHz to 30 GHz |
1
Hz - 20 MHz |
Down
to -146.5 dBm (option and frequency dependent) |
The MS2687B Microwave Spectrum Analyzer covers a frequency range up to 30 GHz and can measure up to 5th-order harmonics on 5 GHz Wireless LANs.
|
 | Digital Mobile Radio Transmitter Tester (MS8608A / MS8609A)
Range |
RBW |
Noise
Level (dBm) |
9
kHz to 13.2 GHz |
1
Hz - 20 MHz |
Down to
-146.5 dBm (option and frequency dependent) |
Now a single tester can cover the development and manufacturing of base stations and mobile stations, as well as the construction and maintenance of base stations.
|
 | WLAN Test Set (MT8860C) The Anritsu MT8860C is the only WLAN Test Set with Network and Direct modes for testing WLAN devices conforming to IEEE 802.11 standards. |
Bluetooth Testers [Back to top]
 | Bluetooth™ Audio Test Set (MT8855A) The MT8855A is the world's first test set designed specifically to perform high-quality audio measurements on products using the Bluetooth Advanced Audio Distribution Profile (A2DP), the Headset profile, or the Hands-Free profile. |
Conformance Test Systems [Back to top]
 | Protocol Conformance Test System (ME7832A) The ME7832A Protocol Conformance Test System is an all-inclusive integrated W-CDMA UE protocol conformance test solution for test houses, UE manufacturers, and chip set manufacturers/integrators that covers the largest number of test cases in the industry based on 3GPP TS34.123-1 for GCF/PTCRB terminal certification.
|
 | W-CDMA Protocol Test System (PTS) (MX785201A) PTS when linked to a prototype or actual 3GPP User Equipment (UE), enables Layer 3 and Layer 2 Test Procedures to be run for verification and subsequent validation of the UE signaling protocol stack. |
Mobile Device Testers [Back to top]  | Shield Box for Mobile Phone Testing (MA8120E) The internal wideband antenna (800 to 2500 MHz) enables testing of W-CDMA/UMTS, cdma2000, GSM, PDC, and PHS mobile terminals and wireless LAN terminals using a radio connection. |
 | Microwave Frequency Counter (MF2400) The MF2400 series is ideal for evaluating mobile radio communications devices and circuits, with the ability to measure the carrier frequency and pulse width of burst signals. |
 | Mobile Handset Service Tester (MT8510B) MT8510B W-CDMA (GSM) UE Tester is useful for applications such as final inspection in UE manufacturing process, or breakdown evaluation in service section. |
 | Radio Communication Analyzer (MT8815B) The MT8815B Radio Communication Analyzer is a multi-system service test platform that covers W-CDMA, GSM/GPRS/EGPRS, cdma2000® 1x/1xEV-DO, and AMPS with just 1 unit. |
 | Radio Communication Analyzer (MT8820B) The MT8820B platform measures the major Tx and Rx characteristics of W-CDMA/HSDPA, GSM/GPRS/EGPRS, CDMA2000® 1X (IS-2000), CDMA2000 1xEV-DO, and PHS/ADVANCED PHS terminals.
|
 | Radio Communication Analyzer (MT8820C) The MT8220C is an all-in-one Radio Communication Analyzer that is the ideal solution to test LTE, 3G and 2G wireless devices. |
Power Meters [Back to top]  | Thermal Sensors (MA2400xA) These sensors provide excellent power measurement accuracy over 50 dB of dynamic range. |
 | USB Power Sensor (MA24126A) The MA24126A power sensor is designed to provide accurate average power measurements from 10 MHz to 26 GHz over 60 dB of dynamic range. |
 | Power Meter (ML2437A/38A) The ML2430A series of power meters are designed for CW applications, offering a combination of accuracy, speed and flexibility in a low cost package. |
 | Wideband Peak Power Meter (ML2487B/88B) The ML2487B Wideband Peak Power Meter provides accurate peak power measurement for communications, wireless, and aerospace applications. |
 | High Accuracy Power Sensor (Average) (PSN50) The PSN50 sensor provides true RMS measurements from -30 dBm to +20 dBm enabling users to make highly accurate power measurements for both CW and digitally modulated signals such as GSM/EDGE, CDMA/EV-DO,WCDMA/HSDPA, WiMAX, and TD-SCDMA. |
Signal Generators [Back to top]
 | RF/Microwave Signal Generator (MG3690C Series) The MG3690C series of broadband signal generators covers audio, HF, VHF, UHF, RF and microwave frequencies from 0.1 Hz to 70 GHz in single coaxial output and up to 325 GHz or beyond, with external multipliers. |
 | Vector Signal Generator 250 kHz to 3 GHz (6 GHz option) (MG3700A) With its 160 MHz high-speed arbitrary waveform baseband generator, wide vector modulation bandwidth, and large capacity ARB memory, MG3700A Vector Signal Generator has the performance to provide signal generation for future wireless communication systems with wider bandwidths.
|
Signaling Testers [Back to top]
 | LTE Signaling Tester (MD8430A) The MD8430A brings flexible and responsive support for the latest 3GPP LTE standard; starting with powerful L1/L2 cache analysis functions, it also supports handover tests with UTRAN/GERAN systems, as well as supporting the latest UE categories. |
 | W-CDMA Signaling Tester (MD8480C) The MD8480C is a base station simulator with ideal protocol development and test functions for developing 3.5G W-CDMA UE supporting HSPA Evolution. |
 | Fading Simulator (MF6900A) The MF6900A Fading Simulator connects via a dedicated digital interface to the MD8430A Signalling Tester to configure a simple LTE base station test system for simulating 3GPP LTE 2x2 MIMO fading. |
| W-CDMA Protocol Test System (PTS) (MX785201A) PTS when linked to a prototype or actual 3GPP User Equipment (UE), enables Layer 3 and Layer 2 Test Procedures to be run for verification and subsequent validation of the UE signaling protocol stack. |
 | Rapid Test Designer (RTD) (MX786201A) MX786201A W-CDMA Rapid Test Designer (RTD) software is a revolutionary new tool that significantly speeds up the development and deployment of W-CDMA (UMTS) user equipment (UE). |
 | MD8470A TD-SCDMA Simulation Kit (MX847040A) Simulates the operation of a TD-SCDMA base station and provides a TD-SCDMA network simulation environment necessary for developing and testing user equipment and applications for TD-SCDMA system. |
 | SU&PL Simulation Server (MX848600A) MX848600A SUPL Simulation Server is the only Windows PC software that tests SUPL protocols and applications by emulating a software terminal emulator without hardware. |
Spectrum Analyzers [Back to top]  | Dipole Antennas (MP534A/B MP651A/B MP663A) Half-wavelength dipole reference antennas. |
 | Log-Periodic Antennas (MP635A MP666A) Constant gain over a wide range so the element length does not require adjustment. These antenna's have a gain of 5 dB. |
| Spectrum Analyzer - 9 kHz to 7.8 GHz (MS2683A)
Range |
RBW |
Noise
Level (dBm) |
9
kHz to 7.8 GHz |
1
Hz - 20 MHz |
Down
to -146.5 dBm (option and frequency dependent) |
The MS2683A has been designed to provide the optimum performance required for evaluation of thrid generation advanced radio communication devices.
|
| Spectrum Analyzer - 9 kHz to 30 GHz (MS2687B)
Range |
RBW |
Noise
Level (dBm) |
9
kHz to 30 GHz |
1
Hz - 20 MHz |
Down
to -146.5 dBm (option and frequency dependent) |
The MS2687B Microwave Spectrum Analyzer covers a frequency range up to 30 GHz and can measure up to 5th-order harmonics on 5 GHz Wireless LANs.
|
 | Handheld Spectrum Master - 9 kHz to 9 GHz (MS2722C) The MS2722C handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems. |
 | Handheld Spectrum Master - 9 kHz to 13 GHz (MS2723C) The MS2723C handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems. |
 | Handheld Spectrum Master - 9 kHz to 20 GHz (MS2724C) The MS2724C handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems. |
 | Handheld Spectrum Master - 9 kHz to 32 GHz (MS2725C) The MS2725C handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems. |
 | Handheld Spectrum Master - 9 kHz to 43 GHz (MS2726C) The MS2726C handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems. |
 | Signal Analyzer (MS2830A) Speed, RF Performance, and Price – with the MS2830A you can have it all! |
| Digital Mobile Radio Transmitter Tester (MS8608A / MS8609A)
Range |
RBW |
Noise
Level (dBm) |
9
kHz to 13.2 GHz |
1
Hz - 20 MHz |
Down to
-146.5 dBm (option and frequency dependent) |
Now a single tester can cover the development and manufacturing of base stations and mobile stations, as well as the construction and maintenance of base stations.
|
Transmitter Testers [Back to top]  | Spectrum Analyzer - 9 kHz to 3 GHz (MS2681A)
Range |
RBW |
Noise
Level (dBm) |
9
kHz to 3GHz |
1
Hz - 20 MHz |
Down to -148.3 dBm (option and frequency
dependent) |
A high-performance spectrum analyzer with wide dynamic range, high resolution bandwidth and high-speed sweep (20 times/s) required for evaluating next-generation wireless systems and devices.
|
| Spectrum Analyzer - 9 kHz to 7.8 GHz (MS2683A)
Range |
RBW |
Noise
Level (dBm) |
9
kHz to 7.8 GHz |
1
Hz - 20 MHz |
Down
to -146.5 dBm (option and frequency dependent) |
The MS2683A has been designed to provide the optimum performance required for evaluation of thrid generation advanced radio communication devices.
|
| Spectrum Analyzer - 9 kHz to 30 GHz (MS2687B)
Range |
RBW |
Noise
Level (dBm) |
9
kHz to 30 GHz |
1
Hz - 20 MHz |
Down
to -146.5 dBm (option and frequency dependent) |
The MS2687B Microwave Spectrum Analyzer covers a frequency range up to 30 GHz and can measure up to 5th-order harmonics on 5 GHz Wireless LANs.
|
| Digital Mobile Radio Transmitter Tester (MS8608A / MS8609A)
Range |
RBW |
Noise
Level (dBm) |
9
kHz to 13.2 GHz |
1
Hz - 20 MHz |
Down to
-146.5 dBm (option and frequency dependent) |
Now a single tester can cover the development and manufacturing of base stations and mobile stations, as well as the construction and maintenance of base stations.
|
Wireless Infrastructure Solutions [Back to top] Area Scanners [Back to top]  | W-CDMA/HSDPA & GSM Area Tester (ML8720C) The ML8720C Area Tester can be used for accurate area-coverage tests even in severe measurement environments with high interference because it can obtain radio wave carrier characteristics with high reliability. |
Handheld Base Station Analyzer [Back to top]
 | High Performance Handheld Base Station Analyzer - BTS Master™ (MT8222A)
Range |
Mode |
Options |
Measurements |
100
kHz - 7.1 GHz |
Spectrum
analyzer
100 kHz - 7.1 GHz |
Power Meter
100 kHz - 7.1 GHz |
Spectrum
Analysis, Cable & Antenna Analysis, GSM/EDGE RF&Demod, WCDMA/HSDPA
RF&Demod, TD-SCDMA & Fixed WiMAX |
BTS Master MT8222A is the value choice for deploying, maintaining and troubleshooting 2G/2.5G, 3G, and 4G wireless base stations.
|
Handheld Cable and Antenna Analyzer [Back to top]  | Site Master™ Cable and Antenna Analyzer - 2 MHz to 1600 MHz (S311D)
Range |
Interference
Immunity On-Freq/On-Channel |
Measurements |
2
MHz -1600 MHz |
-5
dBm / +17 dBm |
Return Loss, SWR, Cable Loss, Distance-To-Fault |
The ideal instrument for Land Mobile Radio (LMR) and Public Safety System technicians and engineers testing P25 and TETRA radios in the VHF/UHF, 400 MHz, 700 MHz, and 800 MHz bands.
|
 | Site Master™ Cable and Antenna Analyzer - 2 MHz to 6 GHz (S331D) Site Master™ Handheld Cable and Antenna Analyzer S331D covering the 25 MHz to 4000 MHz spectrum is the de facto industry standard for installing, provisioning, maintaining, and troubleshooting wireless base station cable and antenna systems. |
 | Site Master Compact Handheld Cable and Antenna Analyzer 2 MHz to 4 GHz (S331E) Anritsu introduces its eighth generation compact handheld Cable and Antenna Analyzers with Spectrum Analyzers for installation and maintenance of wireless networks. They feature the highest performance and the most capabilities ever offered by Anritsu in a compact handheld tester since introducing its first line sweeper in 1995. |
 | Site Master Compact Handheld Cable and Antenna Analyzer with Spectrum Analyzer (S332E) Anritsu introduces its eighth generation compact handheld Cable and Antenna Analyzers with Spectrum Analyzers for installation and maintenance of wireless networks. They feature the highest performance and the most capabilities ever offered by Anritsu in a compact handheld tester since introducing its first line sweeper in 1995. |
 | Site Master Compact Handheld Cable and Antenna Anlyzer (S361E) Anritsu introduces its eighth generation compact handheld Cable and Antenna Analyzers with Spectrum Analyzers for
installation and maintenance of wireless networks. They feature the highest performance and the most capabilities ever offered by Anritsu in a compact handheld tester since introducing its first line sweeper in 1995. |
 | Site Master Compact Handheld Cable and Antenna Analyzer with Spectrum Analyzer (S362E) Anritsu introduces its eighth generation compact handheld Cable and Antenna Analyzers with Spectrum Analyzers for installation and maintenance of wireless networks. They feature the highest performance and the most capabilities ever offered by Anritsu in a compact handheld tester since introducing its first line sweeper in 1995. |
 | Broadband Site Master™ Microwave Transmission Line and Antenna Analyzer - 2 MHz to 10.5 GHz (S810D)
Range |
Interference
Immunity On-Freq/On-Channel |
Measurements |
2
MHz - 10.5 GHz |
-10
dBm / +13 dBm |
Coax
& Waveguide VSWR, Return Loss, Distance-to-Fault, 1-PortCable Loss,
2-Port Cable Loss |
The most accurate, reliable and convenient microwave transmission line and antenna analyzers available for installation, verification, troubleshooting, and repair of microwave communication systems.
|
 | Broadband Site Master™ Microwave Transmission Line and Antenna Analyzer - 2 MHz to 20 GHz (S820D)
Range |
Interference
Immunity On-Freq/On-Channel |
Measurements |
2
MHz - 20 GHz |
-10
dBm / +13 dBm |
Coax
& Waveguide VSWR, Return Loss, Distance-to-Fault, 1-Port Cable Loss,
2-Port Cable Loss |
The most accurate, reliable and convenient microwave transmission line and antenna analyzers available for installation, verification, troubleshooting, and repair of microwave communication systems.
|
Power Meters [Back to top] | Thermal Sensors (MA2400xA) These sensors provide excellent power measurement accuracy over 50 dB of dynamic range. |
 | Microwave USB Power Sensor (MA24108A) The MA24108A power sensor is designed to provide accurate average power measurements from 10 MHz to 8 GHz over 60 dB of dynamic range. |
 | Microwave USB Power Sensor (MA24118A) The MA24118A power sensor is designed to provide accurate average power measurements from 10 MHz to 18 GHz over 60 dB of dynamic range. |
| USB Power Sensor (MA24126A) The MA24126A power sensor is designed to provide accurate average power measurements from 10 MHz to 26 GHz over 60 dB of dynamic range. |
| Power Meter (ML2437A/38A) The ML2430A series of power meters are designed for CW applications, offering a combination of accuracy, speed and flexibility in a low cost package. |
| Wideband Peak Power Meter (ML2487B/88B) The ML2487B Wideband Peak Power Meter provides accurate peak power measurement for communications, wireless, and aerospace applications. |
| High Accuracy Power Sensor (Average) (PSN50) The PSN50 sensor provides true RMS measurements from -30 dBm to +20 dBm enabling users to make highly accurate power measurements for both CW and digitally modulated signals such as GSM/EDGE, CDMA/EV-DO,WCDMA/HSDPA, WiMAX, and TD-SCDMA. |
Service and Network Analyzers [Back to top]
Signal Generators [Back to top]
| RF/Microwave Signal Generator (MG3690C Series) The MG3690C series of broadband signal generators covers audio, HF, VHF, UHF, RF and microwave frequencies from 0.1 Hz to 70 GHz in single coaxial output and up to 325 GHz or beyond, with external multipliers. |
Signaling Testers [Back to top]
| LTE Signaling Tester (MD8430A) The MD8430A brings flexible and responsive support for the latest 3GPP LTE standard; starting with powerful L1/L2 cache analysis functions, it also supports handover tests with UTRAN/GERAN systems, as well as supporting the latest UE categories. |
| Fading Simulator (MF6900A) The MF6900A Fading Simulator connects via a dedicated digital interface to the MD8430A Signalling Tester to configure a simple LTE base station test system for simulating 3GPP LTE 2x2 MIMO fading. |
| SU&PL Simulation Server (MX848600A) MX848600A SUPL Simulation Server is the only Windows PC software that tests SUPL protocols and applications by emulating a software terminal emulator without hardware. |
Spectrum Analyzers [Back to top] | Dipole Antennas (MP534A/B MP651A/B MP663A) Half-wavelength dipole reference antennas. |
| Log-Periodic Antennas (MP635A MP666A) Constant gain over a wide range so the element length does not require adjustment. These antenna's have a gain of 5 dB. |
 | Handheld Spectrum Master - 9 kHz to 7.1 GHz (MS2721B)
Range |
RBW |
Noise
Level (dBm) |
9
kHz to 7.1 GHz |
1
Hz to 3 MHz |
-163
dBm typical @ 1 GHz in 1 Hz RBW |
Ideal for broadcast measurements (including new digital standards), wireless LAN and cellular signals (including WiMAX), and wireless medical patient monitoring systems.
|
| Handheld Spectrum Master - 9 kHz to 9 GHz (MS2722C) The MS2722C handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems. |
 | Handheld Spectrum Master - 9 kHz to 13 GHz (MS2723B)
Range |
RBW |
Noise
Level (dBm) |
9
kHz to 13 GHz |
1
Hz to 3 MHz |
- 156 dBm @ 1 GHz, 1 Hz RBW
- 139 dBm @ 3 GHz, 1 Hz RBW |
Perfectly suited for microwave links and satellite verification. Excellent for 3G base station harmonic measurements.
|
| Handheld Spectrum Master - 9 kHz to 13 GHz (MS2723C) The MS2723C handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems. |
 | Handheld Spectrum Master - 9 kHz to 20 GHz (MS2724B)
Range |
RBW |
Noise
Level (dBm) |
9
kHz to 20 GHz |
1
Hz to 3 MHz |
- 156 dBm @ 1 GHz, 1 Hz RBW
- 136 dBm @ 18 GHz, 1 Hz RBW |
The ultimate tool for satellite, security or commercial communications systems, ideal for spectrum monitoring, installation and testing as well as RF and microwave signal measurements.
|
| Handheld Spectrum Master - 9 kHz to 20 GHz (MS2724C) The MS2724C handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems. |
| Handheld Spectrum Master - 9 kHz to 32 GHz (MS2725C) The MS2725C handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems. |
| Handheld Spectrum Master - 9 kHz to 43 GHz (MS2726C) The MS2726C handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems. |
| Signal Analyzer (MS2830A) Speed, RF Performance, and Price – with the MS2830A you can have it all! |
Transmitter Testers [Back to top]
Discontinued Products [Back to top]
 | Fast Diode Sensors 10 MHz to 18 GHz (MA246XD) This product is now discontinued. Suitable replacement is the MA249xA Wideband sensors, which can be used with an ML248/9xA meter. |
 | W-CDMA RRM Test System (ME7874A) This product is now discontinued and has been replaced by the ME7873F/ME7874F. |
 | Bluetooth Test Set (MT8850A) This product has been discontinued and has been replaced by the MT8852B. |
|
