Anritsu is a leader in the design and production of Precision Microwave Components. Anritsu created and trademarked the V and K Connectors and continues to develop innovative connector products. In addition Anritsu also manufactures assemblies and components to meet specific customer requirements.
 Attenuators [Back to top]
 | K Fixed Attenuators (41KC/B Series) Gold Line Series fixed Attenuators for precision measurement applications covering DC to 40 GHz.
|
 | V Fixed Attenuators (41V Series) Gold Line Series fixed Attenuators for precision measurement applications covering DC to 60 GHz.
|
 | K Fixed Attenuators (43KB-10) Silver Line Series fixed Attenuators for use in systems and OEM equipment covering DC to 26.5 GHz. |
 | K Fixed Attenuators (43KC Series) Silver Line Series fixed Attenuators for use in systems and OEM equipment covering DC to 40 GHz. |
Bias Terminations [Back to top]
Detectors [Back to top]  | Microwave Detectors (5400-71/7 Series) The Anritsu 560-7 and 5400-71 Series RF Detectors are used with the Model 56100A Series or 54100A System for making coaxial transmission loss or gain and power measurements. Also for use with Site Master and Cable Mate. |
 | Microwave Detectors (70/75 Series) By using the latest design and microelectronics production technologies, Anritsu low-barrier Schottky diode detectors out perform others and offer significant cost savings. |
DC Blocks, Bias Tees and Tapered Coils [Back to top]  | Bias Tees (K250/V250) These bias tees are designed for applications where both DC and RF signals must be applied to a device under test. They are particularly suited for active device measurements. |
 | Bias Tees (K251/V251) These ultra-wide bandwidth bias tees have been optimized for optical communications and other high-speed pulse, data or microwave applications. |
 | Kelvin Bias Tee (K252/V252) Kelvin Connection Bias Tee is designed for applications where both DC and RF signals are applied to the Device under Test (DUT) and precision DC measurements are required. |
High Return Loss Connectors and Cables [Back to top]  | K Male Flange Launcher (K103M) The K103M mates with either the K100 Bead or the K100B Hermetic Bead. Excellent Performance up to 40 GHz. |
V Connectors and Accessories [Back to top]  | Sparkplug Torquing Kit (01-105A) This kit includes the tools needed to tighten the K102F, K102M, V102F and V102M sparkplug connectors into a housing at 1.8 Newton-meters (16 inch-pounds). |
 | Torque Wrench (01-201) Torque wrench, for SMA, 3.5 mm, K Connector, and V Connector. |
 | Soldering Fixture (01-303) This tool is used to insert the V100 or V100B glass bead into a housing. It is used to hold the bead in place during soldering.
|
 | Soldering Fixture for V100 Glass Beads (01-306) When installing the V103F or V103M flange-mount connectors, use the 01-306 Soldering Fixture to hold the V100 or V100B bead in place while the bead is being soldered into your housing. |
 | Soldering Fixture for V101F (01-307F) These fixtures are designed to help you successfully install V101F and V101M cable connectors on V085 semi-rigid coaxial cable. |
 | Soldering Fixture for V101M (01-307M) These fixtures are designed to help you successfully install V101F and V101M cable connectors on V085 semi-rigid coaxial cable. |
 | V Connector Cable Assembly Fixture Kit (01-309) Designed to make it easy to correctly cut the ends of the V085 semi-rigid coaxial cable straight, and then trim and shape the ends of the center conductor before installing a V101F or V101M connector. |
 | Semi-rigid Coaxial Cable (V085) V085 is a 1.5 meter length of 2.18 mm (0.085 inches) semi-rigid coaxial cable for use with the V101F, V101M , and K101M-085 connectors. |
 | V Female Flange Launcher (V103F-012) The V103F-012 is identical to V103F, however, this connector can be used with a 0.30 mm glass bead pin. |
 | V Male Flange Launcher (V103M-012) The V103M-012 is identical to V103M, however, this connector can be used with a 0.30 mm glass bead pin. |
 | Stress Relief Contact (V110-1) Stress relief contacts (also known as sliding contacts) are designed to simplify connection to the V100 and V100B bead pins. V110-1 is designed to connect to a 0.15 mm microstrip trace on Alumina.
bead pins. |
K Connectors and Accessories [Back to top]
 | Soldering Fixture (01-103) Soldering Fixture for sparkplug launcher glass beads, package of 10.
|
 | Drill and Tap Set (01-104) This drill and tap set is used to precisely machine the concentric holes needed for mounting K Connector® in housings. This is the kit to use when stress relief contacts are not being used. |
| Sparkplug Torquing Kit (01-105A) This kit includes the tools needed to tighten the K102F, K102M, V102F and V102M sparkplug connectors into a housing at 1.8 Newton-meters (16 inch-pounds). |
 | K Soldering Fixture for Flange Launcher Glass Bead (01-106) When you use the K103F, K103M, K104F or K104M flange-mount K Connector ® launchers, use this soldering fixture to hold a K100 or K100B bead in place while you are soldering the bead into a housing. |
 | Drill and Tap Set (01-108) This drill and tap set is used to precisely machine the concentric holes needed for mounting K Connector ® in housings. This is the kit to use when stress relief contacts are being used. |
| Torque Wrench (01-201) Torque wrench, for SMA, 3.5 mm, K Connector, and V Connector. |
 | K Female In-Line Cable Connector (K101F) The K101F female cable connector is designed to install on K118 3 mm (0.118 inch) semi-rigid cable and provides excellent performance from DC to 40 GHz. |
 | K Male In-Line Cable Connector (k101M) The K101M K male in-line cable connector is designed to install on K118 3 mm (0.118 inch) semi-rigid cable and provide excellent performance from DC to 40 GHz. |
 | K Male In-Line Cable Connector (K101M-085) The K101M-085 K male in-line cable connector is designed to install on V085 2.16 mm (0.085 inch) semi-rigid cable and provides excellent performance from DC to 40 GHz. |
 | K Female Flange Launcher (K103F) The K103F mates with either the K100 Bead or the K100B Hermetic Bead. Excellent Performance up to 40 GHz. |
 | K Female Flange Launcher (K104F) The K104F mates with either the K100 Bead or the K100B Hermetic Bead. Excellent Performance up to 40 GHz. |
 | K Male Flange Launcher (K104M) The K104M mates with either the K100 Bead or the K100B Hermetic Bead. Excellent Performance up to 40 GHz. |
 | Stress Relief Contacts (K110-1) Stress relief contacts (also known as sliding contacts) are designed to simplify connection to the K100 and K100B bead pins. K110-1 is designed to connect to a 0.15 mm or larger, microstrip trace on Alumina. |
 | Stress Relief Contacts (K110-2) Stress relief contacts (also known as sliding contacts) are designed to simplify connection to the K100 and K100B bead pins. K110-2 is designed to connect to a 0.41 mm or larger, trace on stripline. |
 | Stress Relief Contacts (K110-3) Stress relief contacts (also known as sliding contacts) are designed to simplify connection to the K100 and K100B bead pins. K110-3 is designed to use with a 0.41 mm or larger, microstrip trace on Duroid®. |
 | Semi-rigid Coaxial Cable (K118) K118 is a 1.5 meter length of 3.00 mm (0.118 inches) semi-rigid coaxial cable for use with K101F and K101M connectors. |
 | Stress Relief Contacts (S110-1) The S110-1 is a Microstrip and Coplaner Waveguide stress relief contact for 0.38 mm glass feedthru center conductor. |
 | Stress Relief Contacts (S110-3) Stress relief contacts (also known as sliding contacts) are designed to simplify connection to the bead pins. |
W1 Connectors [Back to top]  | W1 Female Connector (W1-101F) The W1-101F female cable connector is designed to install on a UT-47 semi-rigid cable and provides excellent performance from DC to 110 GHz. |
 | W1 Male Connector (W1-101M) The W1-101M male cable connector is designed to install on a UT-47 semi-rigid cable and provides excellent performance from DC to 110 GHz. |
Universal Test Fixtures [Back to top]
Power Sensors [Back to top]  | Thermal Sensors (MA2400xA) These sensors provide excellent power measurement accuracy over 50 dB of dynamic range. |
 | Microwave USB Power Sensor (MA24108A) The MA24108A power sensor is designed to provide accurate average power measurements from 10 MHz to 8 GHz over 60 dB of dynamic range. |
 | Microwave USB Power Sensor (MA24118A) The MA24118A power sensor is designed to provide accurate average power measurements from 10 MHz to 18 GHz over 60 dB of dynamic range. |
 | USB Power Sensor (MA24126A) The MA24126A power sensor is designed to provide accurate average power measurements from 10 MHz to 26 GHz over 60 dB of dynamic range. |
 | Fast Diode Sensors 10 MHz to 18 GHz (MA246XD) This product is now discontinued. Suitable replacement is the MA249xA Wideband sensors, which can be used with an ML248/9xA meter. |
Precision Terminations [Back to top]  | Coaxial Termination (28K50) K Termination DC to 40 GHz - These precision, metrology-grade terminations are used in measurement systems that need to achieve the smallest possible reflections. |
 | Coaxial Termination (28KF50) K Termination DC to 40 GHz - These precision, metrology-grade terminations are used in measurement systems that need to achieve the smallest possible reflections. |
 | Coaxial Termination (28N50-2) Type N Termination DC to 18 GHz - These precision, metrology-grade terminations are used in measurement systems that need to achieve the smallest possible reflections. |
 | Coaxial Termination (28V50B) V Termination DC to 65 GHz - These precision, metrology-grade terminations are used in measurement systems that need to achieve the smallest possible reflections. |
 | Coaxial Termination (28VF50B) V Termination DC to 110 GHz - These precision, metrology-grade terminations are used in measurement systems that need to achieve the smallest possible reflections. |
 | W1 Male Precision Termination (28W50) W1 Termination DC to 110 GHz - W1 Precision Metrology-grade Terminations are used in measurement systems that need to achieve the smallest possible reflections. |
 | W1 Female Precision Termination (28WF50) W1 Termination DC to 110 GHz - W1 Precision Metrology-grade Terminations are used in measurement systems that need to achieve the smallest possible reflections. |
 | Coaxial Termination (K210) K Termination DC to 40 GHz - These precision, metrology-grade terminations are used in measurement systems that need to achieve the smallest possible reflections. |
 | Coaxial Termination (V210) V Termination DC to 65 GHz - The precision, metrology-grade terminations are used in measurement systems that need to achieve the smallest possible reflections. |
Discontinued [Back to top]
|
